Parker AC30 Série Mode D'emploi page 179

ETHERNET PARAMETER SUMMARY
Parameter Name
Ethernet State
Ethernet parameter.
Provides the state of the inverter Ethernet link.
Enumerated values:
0: INITIALISING
1 :NO LINK
2: RESOLVING IP
3: RESOLVING DHCP
4: RESOLVING AUTO-IP
5: RESOLVED IP
6: STOPPING DHCP
7: DUPLICATE IP
8: FAULT
MAC Address
Ethernet parameter.
Provides the Ethernet MAC address.
IP Address
Ethernet parameter.
Provides the current IP address of the Ethernet
AC30 series Variable Speed Inverters
No. Path
0919 Monitor::Communications::Base Ethernet
Parameters::Base Comms:: Ethernet
- Driver initialising
- Ethernet not connected to a network
- Waiting for an IP address to be set manually
- Waiting for a DHCP server to provide an IP address
- Waiting to Auto-IP to provide an IP address
- IP address is set – communication is possible
- Inverter is stopping the DHCP service
- Another device on the network has the same IP address
- Fault detected
0920 Monitor::Communications::Base Ethernet
Parameters::Base Comms:: Ethernet
0926 Monitor::Communications::Base Ethernet
Parameters::Base Comms:: Ethernet
Default Range
0:INITIALISING 0:INITIALISING
1:NO LINK
2:RESOLVING IP
3:RESOLVING DHCP
4:RESOLVING AUTO-IP
5:RESOLVED IP
6:STOPPING DHCP
7:DUPLICATE IP
8:FAULT
00-00-00-00-00-00 xx-xx-xx-xx-xx-xx
0.0.0.0 0.0.0.0 to
255.255.255.255
12-8
Ethernet
Units Writable
NEVER
NEVER
NEVER