Parker AC30 Série Mode D'emploi page 373

Parameter Name No.
1142
GKP Password
Defines the password to be entered to allow modification to parameters using the GKP. This password does not affect access via the
web page. A value of 0000, (the default value), inhibits the password feature. Entering a value other than 0000 causes the GKP to
prompt for the password before proceeding to the parameter edit mode.
Once a password has been entered the GKP remains unlocked. To re-lock the password return to the top of the menu tree then press
Soft Key 1.
1097
Password in Favourite
When the GKP Password is active this parameter may be used to selectively defeat the password feature in the Favourites menu. By
default this parameter is FALSE, meaning that the password is ignored when modifying Favourites parameters.
1098
Password in Local
When the GKP Password is active this parameter may be used to selectively defeat the password feature in the Control Screen menu.
By default this parameter is FALSE, meaning that the password is ignored when modifying the Local Setpoint and other related
parameters.
1099
Technician Password
The password required to change from Operator View level to Technician View Level. If this is zero then no password is required.
1637
Engineer Password
The password required to change from Operator or Technician View level to Engineer View Level. If this is zero then no password is
required.
1143
Version
Indicates the firmware version of the attached GKP.
AC30 series Variable Speed Drive
Path
Setup::Environment
Parameters::Keypad::Graphical Keypad
Parameters::Keypad::Graphical Keypad
Parameters::Keypad::Graphical Keypad
Parameters::Keypad::Graphical Keypad
Parameters::Keypad::Graphical Keypad
Parameters::Keypad::Graphical Keypad
Parameter Reference
Default Range
0000
FALSE
FALSE
0000
0000
D-87
Units Writable
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
NEVER