Parker AC30 Série Mode D'emploi page 176

12-5
Ethernet
Using Both DHCP and Auto-IP
Parameter
0929 DHCP
0930 Auto IP
If both the DHCP and Auto-IP are enabled then an IP address will be obtained automatically depending on the network. This is the default
setting.
The inverter will take a link-local address in the range 169.254.*.* if no DHCP server is discovered on the network. If a DHCP server is available
(or becomes subsequently available) then the inverter will take the IP address from the server. Note that the DHCP has precedence.
Setting
TRUE
TRUE
AC30 series Variable Speed Inverters