Parker AC30 Série Mode D'emploi page 331

Data Logger
Parameters::Device Manager::Data Logger
Regularly log the value of the selected parameters to the SD Card
Parameter Name
Log Enable
Set to TRUE to enable the data logger
Log Period
Defines the period between each set of data. The maximum value is equivalent to 24 hours.
Log File Name
Defines the first characters of the log file name. The Data Logger automatically appends this name with a 4 digit sequence number and
the extension ".csv".
Log to New File
On a change from FALSE to TRUE the Data Logger creates a new log file and starts saving data to this. The log file sequence number
is automatically incremented each time a new file is created.
Log New File On Reset
If TRUE the Data Logger will create a new log file each time the drive is powered up.
Limit Log File Size
When TRUE the data logger limits the maximum log file size to 10 M Bytes. When this size is reached the Data Logger creates a new
log file and starts saving data to this. The log file sequence number is automatically incremented each time a new file is created.
AC30 series Variable Speed Drive
No. Path
Parameters::Device Manager::Data Logger
1835
Parameters::Device Manager::Data Logger
1836
Parameters::Device Manager::Data Logger
1837
Parameters::Device Manager::Data Logger
1838
Parameters::Device Manager::Data Logger
1839
Parameters::Device Manager::Data Logger
1840
Parameter Reference
Default Range
FALSE
1.000 0.500 to 86400.000
logfile_
FALSE
FALSE
FALSE
D-45
Units Writable
ALWAYS
s ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS