Parker AC30 Série Mode D'emploi page 377

Parameter Name No.
DC Inj Timeout 0330
Maximum time in the low frequency injection braking state
DC Inj Base Volts 0331
Maximum volts applied at base speed
Note: DC injection braking procedure has higher percentage of successful stoppages for the lower power range (frames D-G), than at higher power
range (frames H-K).
AC30 series Variable Speed Drive
Path
Parameters::Motor Control::Inj Braking
Parameters::Motor Control::Inj Braking
Parameter Reference
Default Range
90.000 0.000 to 600.000
100.00 0.00 to 115.47
D-91
Units Writable
ALWAYS
s
ALWAYS
%