Parameter Name
No.
If set to TRUE this parameter informs the encoder option card to expect just A and B from the encoder, not differential /A and /B.
Encoder Speed
1516
The speed measured by the encoder, in revolutions per minute.
Encoder Count Reset
1517
If set to TRUE resets the encoder count.
Encoder Count Init
1783
If set to TRUE the encoder count is reset to zero when the drive powers up.
Encoder Count
1518
This parameter shows the encoder count, which is a 32 bit counter that will increment and decrement with the encoder pulses, up to
2^31 or down to -2^31.
AC30 series Variable Speed Drive
Path
Monitor::Inputs and Outputs
Parameters::Option IO::Encoder
Same as PNO 1511
Parameters::Option IO::Encoder
Same as PNO 1516
Parameter Reference
Default
Range
x.
Min to Max
FALSE
TRUE
Min to Max
D-59
Units
Writable
RPM
NEVER
ALWAYS
ALWAYS
NEVER