Parker AC30 Série Mode D'emploi page 440

D-154
Parameter Reference
Parameter Name No.
Ramp Speed Output 0500
Output speed
Jog Setpoint 0501
The setpoint is the target reference that the Drive will ramp to
Jog Acceleration Time 0502
The time that the Drive will take to ramp the jog setpoint from 0.00% to 100.00%.
0503
Jog Deceleration Time
The time that the Drive will take to ramp the jog setpoint from 100.00% to 0.00%.
Stop Ramp Time 0504
Rate at which the demand is ramped to zero after the ramp has been quenched
Zero Speed Threshold 0505
Hold for zero speed detection used by stop sequences
Zero Speed Stop Delay 0506
Sets the time at which the Drive holds zero speed before quenching after a normal stop or a jog stop. This may be particularly useful if
a mechanical brake requires time to operate at zero speed, or for jogging a machine to position
Path
Parameters::Motor Control::Ramp
Parameters::Motor Control::Ramp
Parameters::Motor Control::Ramp
Parameters::Motor Control::Ramp
Same as PNO 484
Parameters::Motor Control::Ramp
Parameters::Motor Control::Ramp
Default Range
x.x -200.0 to 200.0
10.0 0.0 to 100.0
1.000 0.000 to 3000.000
1.000 0.000 to 3000.000
10.000 0.000 to 600.000
0.1 0.0 to 100.0
0.500 0.000 to 30.000
Units Writable
NEVER
%
% ALWAYS
s ALWAYS
s ALWAYS
ALWAYS
s
ALWAYS
%
s ALWAYS
AC30 series Variable Speed Drive