Parker AC30 Série Mode D'emploi page 230

TCP/IP Interface Object – F5h
Instance Attribute
1 1
2
3
4
5
6
13
Supported Service Code
01h
0Eh
10h
AC30 series Variable Speed Inverter
Description Type
Status UINT
Configuration DWORD
capability
Configuration control DWORD
Physical Link Object
Structure of:
Path Size UINT
Path Array of WORD
Interface
Configuration
Structure of:
IP Address UDINT
Network Address UDINT
Gateway Address UDINT
Name Server UDINT
Name Server 2 UDINT
Domain Server Size UINT
Domain Name STRING
Host Name
Structure of:
Size UINT
Host Name STRING
Encap TMO UINT
Service Name
Get_Attribute_All
Get_Attribute_Single
Set_Attribute_Single
Value
0 – Interface Configuration not
configured
1 – Interface Configuration comes from
DHCP
2 – Interface Configuration comes from
non-CIP settings
Bit 2 – DHCP capable (1)
Bit 5 – non-CIP setting capable (1)
- If DHCP is disabled then writing a
value of 0 is allowed
- If DHCP is enabled then writing a
value is 2 is allowed
2
20F6h 2401h
Inverter IP address
Inverter network mask
Inverter gateway address
0
0
Returns the Domain Name if DHCP is
enabled and the DHCP server has
provided it.
If DHCP is enabled and bound, returns
the Host Name if the DHCP server has
provided it, otherwise returns the
default Host Name derived from the
AC30 MAC address.
Inactivity TMO seconds.
On Type 1 Reset this value will revert
to a value of 120.
A-28
Fieldbuses
Access
Get
Get
Get/Set
Get
Get
Get
Get/Set