Parker AC30 Série Mode D'emploi page 435

Raise Lower
Setup::Application::Raise Lower
Monitor::Application::Raise Lower*
Appears when the Raise/Lower macro is selected.
The Raise/Lower function acts as an internal motorised potentiometer (MOP) used as a reference source.
Parameter Name No.
RL Ramp Time
Rate of change of the Output. Defined as the time to change from 0.00% to 100.00% . Note that the raise and lower rates are always
the same.
L Reset Value
The value Output is set to when the Reset Input is TRUE.
RL Maximum Value 1903
The maximum value to which Output will ramp up to.
RL Minimum Value 1904
The minimum value to which Output will ramp down to.
Reset Input
This is connected to a Digital Input as part of the selected Macro. When TRUE forces Output to track Reset Value.
Raise Input
This is connected to a Digital Input as part of the selected Macro. When TRUE causes Output to ramp up.
AC30 series Variable Speed Drive
Path
1901 Setup::Application::Raise Lower
1902 Setup::Application::Raise Lower
Setup::Application::Raise Lower
Setup::Application::Raise Lower
Parameter Reference
Default Range
10.0 0.0 to 600.0
0.0 -500.0 to 500.0
100.0
-500.0 to 500.0
-500.0 to 500.0
-100.0
D-149
Units Writable
ALWAYS
s
% ALWAYS
% ALWAYS
ALWAYS
%