Parker AC30 Série Mode D'emploi page 341

Parameter Name No.
The rating of the power stack that the Control Module is fitted to. When the Control Module not attached to a stack this parameter is not
visible and is ignored.
The Power Stack names ending in "R1" are for the initial release of Frame G stacks with ventilation holes in the casing. Later revisions
of the Frame G stacks have no ventilation holes but have an internal cooling fan.
Attached to Stack 0695
A Boolean parameter that indicates that the Control Module is attached to a power stack. When the Control Module is not attached to a
stack but is powered using the auxiliary 24v input this parameter will indicate FALSE.
Stack Pcode 1109
The product code string that may be used to order an equivalent Power Stack.
Stack Serial No 1258
The serial number of the Power Control Card, (part of the Power Stack assembly).
AC30 series Variable Speed Drive
Path
Parameters::Device Manager::Drive info
Parameters::Device Manager::Drive info
Parameters::Device Manager::Drive info
Parameter Reference
Default Range
11:45.0 A 400 V R1
12:60.0 A 400 V R1
13:73.0 A 400 V R1
14:87.0 A 400 V
15:105 A 400 V
16:145 A 400 V
17:180 A 400 V
18:205 A 400 V
19:260 A 400 V
20:45.0 A 400 V
21:60.0 A 400 V
22:73.0 A 400 V
23:315 A 400 V
24:380 A 400 V
25:440 A 400 V
26:530 A 400 V
27:590 A 400 V
28:650 A 400 V
29:730 A 400 V
30:840 A 400 V
D-55
Units Writable
NEVER
NEVER
NEVER