Parker AC30 Série Mode D'emploi page 168

10-18
Détection des défauts et des erreurs
The data recorded at the instant of the trip is output at the end of the file. This consists of:
•
Control module serial number, (parameter 0977 Control Module Serial)
•
Time of the trip. This is either the control board age, or the time from the optional Real Time Clock if fitted.
•
State of all other trips, active or warning.
•
Count of total motor starts, (parameter 1732 Motor Start Count)
•
Count of total times the 3-phase has been powered
•
For each trip, a count of the total times that trip has been activated.
•
A record of near trip events for Over Current, Over Voltage and Under Voltage.
•
The product code of the drive, expressed as a number in internal format.
•
The IO Option fitted, (parameter 1179 Option IO Fitted)
•
The Communications Option fitted, (parameter 0045 Comms Fitted)
•
The System board type, (parameter 1740 System Board Fitted)
•
The motor control type, (parameter 0511 Motor Type or AFE)
•
The control strategy, (parameter 0512 Control Stragegy)
•
The control type, (parameter 1533 Control Type)
•
The firmware version
•
The version of CoDeSys used to create the application.
Variateur de vitesse de la série AC30