Parker AC30 Série Mode D'emploi page 441

Parameter Name No.
Quickstop Time Limit 0507
Maximum time that the Drive will try to Quickstop, before quenching
Quickstop Ramp Time 0508
Rate at which the Speed Demand is ramped to zero when Quickstop is active
Final Stop Rate 0509
Rate at which any internally generated setpoint trims are removed. For example, the trim due to the slip compensation in Volts/Hz
control mode.
AC30 series Variable Speed Drive
Path
Parameters::Motor Control::Ramp
Parameters::Motor Control::Ramp
Parameters::Motor Control::Ramp
Parameter Reference
Default Range
30.000 0.000 to 3000.000
0.100 0.000 to 600.000
1200 1 to 4800
D-155
Units Writable
ALWAYS
s
ALWAYS
s
Hz/s ALWAYS