Parker AC30 Série Mode D'emploi page 298

D-12
Parameter Reference
Parameter Name No.
DC link voltage demand, setpoint for voltage control loop.
1709
AFE VDC Ramp
DC link voltage ramp rate.
1710
AFE VDC Feed Forward
DC link voltage loop feed forward term.
1697
AFE VDC Min Level
AFE healthy DC link level, for precharge control, if necessary to be set lower than undervoltage trip level.
1717
AFE Correction Angle
Angle correction offset.
1731
AFE Transf Angle Offset
Angular offset necessary due to (potential) transformer delta/star connections.
1712
AFE Synchronizing
TRUE if AFE in synchronizing state.
1713
AFE Synchronized
TRUE if AFE has synchronized to mains frequency.
1714
AFE Enable Drive
Path
Parameters::Regen Control::AFE
Parameters::Regen Control::AFE
Parameters::Regen Control::AFE
Parameters::Regen Control::AFE
Parameters::Regen Control::AFE
Parameters::Regen Control::AFE
Parameters::Regen Control::AFE
Parameters::Regen Control::AFE
Default Range
0.05 0.01 to 100.00
0.0000 -1.5000 to 1.5000
400.00 340.00 to 5000.00
0.00 -90.00 to 90.00
0.00 0.00 to 360.00
Units Writable
% ALWAYS
ALWAYS
ALWAYS
ALWAYS
deg ALWAYS
NEVER
NEVER
NEVER
AC30 series Variable Speed Drive