Control Mode - Parker AC30 Série Mode D'emploi

Control Mode

Setup:: Motor Control::Control & Type:: Control Strategy
Parameters::Motor Control::Control & Type::Control Strategy
The control mode block provides the means for selecting the type of motor and the desired method of controlling the motor.
Parameter Name No.
or AFE
0511
Motor Type
Motor type selection parameter
Allows the user to select the type of motor.
Control Strategy 0512
This parameter will only become visible if an induction motor is selected. If a PMAC motor is selected, the Control Strategy will
automatically be set to Vector Control.
Select control strategy selection parameter.
Allows the user to select the method of controlling the motor.
Control Type 1533
AC30V : This parameter will only become visible if an induction motor is selected, Control Strategy is set to Vector Control, and the
encoder option is fitted. If the encoder option is not fitted, the control strategy is forced to be sensorless.
AC30P/D: This parameter will only become visible if Control Strategy is set to Vector Control. If the encoder option is not fitted,
selecting ENCODER FEEDBACK will give a trip.
This parameter allows selects between sensorless control, and control using encoder feedback.
If an encoder feedback is available, it would normally be the preferred choice as it gives better speed control and higher performance.
AC30 series Variable Speed Drive
Path
Setup::Motor Control::Control and Type
Setup::Regen Control
Parameters::Control Mode::Control
Mode
Control and
Setup::Motor Control::
Type
Parameters::Control Mode::Control
Mode
Setup::Motor Control::Control and Type
Parameters::Control Mode::Control
Mode
Parameter Reference
Default Range
0 0:INDUCTION MOTOR
1:PMAC MOTOR
2:AFE
0 0:VOLTS - HERTZ CONTROL
1:VECTOR CONTROL
0 0:SENSORLESS
1:ENCODER FEEDBACK
D-39
Units Writable
STOPPED
STOPPED
STOPPED