Parker AC30 Série Mode D'emploi page 338

D-52
Parameter Reference
Parameter Name No.
0996
IO Option FE State
1742
System Board FE State
The parameters above indicate the state of individual components, (or Functional Elements), within the drive. They may help with fault
finding if the drive ever fails to enter the normal Operational state.
0997
Config Fault Area
Indicates which component within the drive is preventing the drive from entering the normal Operational state.
0998
RTA Code
Run Time Alert fault code, indicates a fault in the hardware or configuration, typicaly detected during power on initialization. Refer to
chapter 10, Trips and Fault Finding.
0999
RTA Data
Data associated with a Run Time Alert.
Path
Parameters::Device Manager::Device
State
Parameters::Device Manager::Device
State
Parameters::Device Manager::Device
State
Monitor::Trips
Parameters::Device Manager::Device
State
Same as PNO 998
Default Range
Same as PNO 989
Same as PNO 989
0:NONE
1:POWER STACK
2:OPTION IO
3:OPTION COMMS
4:APPLICATION
5:MOTOR CONTROL
6:KEYPAD
7:BASE COMMS
8:BASE IO
9:FEEDBACK MISSING
10:SYSTEM BOARD
Units Writable
NEVER
NEVER
NEVER
NEVER
NEVER
AC30 series Variable Speed Drive