Peer To Peer - Parker AC30 Série Mode D'emploi

Masquer les pouces Voir aussi pour AC30 Série:

Table des Matières

Les langues disponibles

Peer to Peer

The Peer to Peer module is implemented in the AC30P and AC30D inverters and provides Ethernet communications between inverters.

The data sent is not accessible to the user. The initial use of the Peer to Peer module is for shaft locking applications using the Virtual Master or

Real Master control and used in conjunction with the Precision Time Protocol (PTP).

Note: The Peer to Peer module broadcasts data at a high rate, as such, when the Peer to Peer module is enabled it is recommended not to

connect the inverters to a corporate or other sensitive network.

CONFIGURATION

To enable the Peer to Peer module set the parameter 1725 Peer to Peer Enable to TRUE on all inverters participating. For most applications

the default settings may be used. For further configuration of the module see the section Peer to Peer Parameter Summary.

AC30 series Variable Speed Inverters

Ac30p Ac30d Ac30v