Parker AC30 Série Mode D'emploi page 418

D-132
Parameter Reference
Parameter Name No.
Crossing zero speed
Speed input (1)
Speed setpoint (2)
Startup speed
0.75 * Startup speed
0.75 * Startup speed
Startup speed
Current setpoint (3)
Startup current
Startup current
Torque ON
Open Loop
Closed loop
(1) : User speed setpoint
(2) : Internal speed setpoint
(3) ; Internal current setpoint
(4) : ramps are generated based on ramp parameters
(5) : startup procedure : a current is smoothly installed into the motor
(6) : zero crossing for the speed input : the current must be inverted into the motor
Path
Startup
time
(5)
Ramp (4)
Default Range Units Writable
AC30 series Variable Speed Drive