Parker AC30 Série Mode D'emploi page 395

Motor Nameplate
Setup::Motor Control::Motor Nameplate
Parameters::Motor Control::Motor Nameplate
Only available if IM MOTOR selected in Control Mode.
In this function you enter the details of the motor under control and any available motor nameplate information.
Refer to Induction Motor Data parameters which are determined by the Auto Tune feature for example the Magnetising Current, Stator
Resistance, Leakage Inductance, Mutual Inductance and Rotor time Constant for model parameters.
Note
Do not attempt to control motors whose rated current is less than 25% of the drive rated current. Poor motor control or
Autotune problems may occur if you do.
Parameter Name No.
Rated Motor Current 0455
Rated motor current on the name plate
Base Voltage 0456
The rated motor voltage on the name plate
Base Frequency 0457
The base motor frequency on the name plate
Motor Poles 0458
Motor poles on the nameplate
Nameplate Speed 0459
Rated motor speed on the name plate
AC30 series Variable Speed Drive
Path
Setup::Motor Control::Motor Nameplate
Parameters::Motor Control::Motor
Nameplate
Same as PNO 455
Same as PNO 455
Same as PNO 455
Same as PNO 455
Parameter Reference
Default Range
1.00 0.00 to 10000.00
400.00 0.00 to 1000.00
50.00 0.00 to 1000.00
4, 2 to 1000
1420.00 0.00 to 100000.00
D-109
Units Writable
STOPPED
A
STOPPED
V
STOPPED
Hz
STOPPED
RPM STOPPED