Parker AC30 Série Mode D'emploi page 181

Parameter Name
DHCP
Ethernet parameter.
DHCP enable. Set to TRUE to obtain an IP address from the connected DHCP server.
Auto IP
Ethernet parameter.
DHCP enable. Set to TRUE to obtain an IP address using Auto-IP.
User IP Address
Ethernet parameter.
The preferred fixed IP address of the Ethernet.
For the Ethernet to take on this address both DHCP and Auto-IP must be disabled.
User Subnet Mask
Ethernet parameter.
The preferred fixed subnet mask of the Ethernet.
For the Ethernet to take on this address both DHCP and Auto-IP must be disabled.
User Gateway Address
Ethernet parameter.
The preferred fixed gateway address of the Ethernet.
For the Ethernet to take on this address both DHCP and Auto-IP must be disabled.
Lock
Ethernet parameter.
When set to TRUE, this prevents the IP settings being changed via an IP configuration tool. The IP settings may still be modified
from the GKP and the inverter web Parameters page.
AC30 series Variable Speed Inverters
No. Path
0929 Setup::Communications::Base Ethernet
Parameters::Base Comms:: Ethernet
0930 Setup::Communications::Base Ethernet
Parameters::Base Comms:: Ethernet
0933 Setup::Communications::Base Ethernet
Parameters::Base Comms:: Ethernet
0934 Setup::Communications::Base Ethernet
Parameters::Base Comms:: Ethernet
0935 Setup::Communications::Base Ethernet
Parameters::Base Comms:: Ethernet
0936 Parameters::Base Comms:: Ethernet
Default Range
TRUE FALSE
TRUE
TRUE FALSE
TRUE
0.0.0.0 0.0.0.0 to
255.255.255.255
0.0.0.0 0.0.0.0 to
255.255.255.255
0.0.0.0 0.0.0.0 to
255.255.255.255
FALSE FALSE
TRUE
12-10
Ethernet
Units Writable
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS
ALWAYS