Parker AC30 Série Mode D'emploi page 355

Parameter Name No.
Actual Field Current 0400
Calculated field, based on the Id current.
Motor Current Percent 0401
This diagnostic shows the level of rms line current being drawn from the drive as a percentage of the rated current of the relevant
motor definition.
Motor Current 0402
This diagnostic shows the level of rms line current in Amps being drawn from the Drive.
100% Stack Current A 0403
This diagnostic indicates the stack rating in Amps. This reduces as a function of pwm switching frequency.
Stack Current (%) 0404
Stack current percentage.
Motor Terminal Volts 0405
Volts between motor phases in Vrms.
CM Temperature 0406
Temperature of Control Module in
AC30 series Variable Speed Drive
Path
Same as PNO 393
Same as PNO 393
Same as PNO 393
Parameters::Motor Control::Feedbacks
Parameters::Motor Control::Feedbacks
Same as PNO 393
Same as PNO 393
o
Centigrade.
Parameter Reference
Default Range
x.x -200.0 to 200.0
x.x 0.0 to 600.0
x.x 0.0 to 2000.0
x.x 0.0 to 2000.0
x. 0 to 500
x. 0 to 1000
x.x -25.0 to 200.0
D-69
Units Writable
NEVER
%
NEVER
%
NEVER
A
A NEVER
% NEVER
NEVER
V
NEVER
°C