Parker AC30 Série Mode D'emploi page 370

D-84
Parameter Reference
General Purpose IO
Monitor::Inputs and Outputs
Parameters::Option IO::General Purpose IO
The General Purpose IO parameters configure the use of the four IO Options. This group of parameters is only visible when an IO Option is selected.
Parameter Name No.
1181
Anin 11 Value
(Terminal X21.2) - The input value expressed as a percentage of range, (+/- 100%), following Offset and Scale.
Anin 12 Value 1182
(Terminal X21.3) - The input value expressed as a percentage of range, (+/- 100%), following Offset and Scale.
Anin 13 Value 1183
(Terminal X21.4) - The input value expressed as a percentage of range, (+/- 100%), following Offset and Scale.
Anin 11 Offset 1461
The offset is expressed as a percentage of the hardware range. For example an offset of 10% is equivalent to 1V on the input.
The offset is added to the measured value.
Anin 11 Scale 1462
The scale is a simple multiplication factor. The input voltage is converted to a percentage value. 1461 Anin 11 Offset is added and the
result is multiplied by Scale. The result is presented in parameter 1181 Anin 11 Value.
Anin 12 Offset 1463
The offset is expressed as a percentage of the hardware range. For example an offset of 10% is equivalent to 1V on the input.
The offset is added to the measured value.
Path
Monitor::Inputs and Outputs
Parameters::Option IO::General Purpose
IO
Same as PNO 1181
Same as PNO 1181
Setup::Inputs and Outputs::Option
Parameters::Option IO::General Purpose
IO
Same as PNO 1461
Same as PNO 1461
Default Range
x.xx -100.00 to 100.00
x.xx -100.00 to 100.00
x.xx -100.00 to 100.00
0.00 Min to Max
1.0000 Min to Max
0.00 Min to Max
Units Writable
% NEVER
NEVER
%
NEVER
%
ALWAYS
%
ALWAYS
% ALWAYS
AC30 series Variable Speed Drive