B.1 Eu Declaration Of Incorporation In Accordance With Iso/Iec 17050-1 :2010 - Universal Robots UR10 Traduction Des Instructions D'origine

Reference to Harmonized Standards Used :
(I) EN ISO 10218-1 :2011 as ap-
plicable
(I) EN ISO 12100 :2010
(I) EN ISO 13732-1 :2008
(I) EN ISO 13849-1 :2008 & 2015*
*Note : From the 2008 to the 2015
editions, there are no changes
relevant to our robots TUV Nord
Certificate 4478014097602
Reference to Other Technical Standards and Specifications Used :
(I) ISO 9409-1 :20047
(I) ISO/TS 15066 as applicable
(III) IEC 60068-2-1 :2007
(III) IEC 60068-2-2 :2007
The manufacturer, or his authorised representative, shall transmit relevant information
about the partly completed machinery in response to a reasoned request by the
national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body
Bureau Veritas, certificate #DK008850.
UR10/CB3

B.1 EU Declaration of Incorporation in accordance with ISO/IEC 17050-1 :2010

(I) EN ISO 13849-2 :2012
(I) EN ISO 13850 :2015
(I) EN 1037 :1995+A1 :2008
(II) EN 60204-1 :2006/ A1 :2010
(I) EN ISO 13850 :2015
(II) EN 60320-1 :2001/ A1 :2007
(II) EN 60529 :1991/ A2 :2013
(III) IEC 60068-2-27 :2008
(III) IEC 60068-2-64 :2008
(II) IEC 60664-5 :2007
(III) IEC 61326-3-1 :2008
(II) EN 60664-1 :2007
(II) EN 60947-5-5 :1997/
A11 :2013
(II) EN 61000-6-2 :2005
(III)EN 61000-6-4 :2007/
A1 :2011
(III)EN 61131-2 :2007
(II)
A1 :2006
(II)
[SIL2]
ISO 14664-1 :2015 Class 5
for
control assembly with en-
closure
and Class 5 for UR3, UR5
and UR10 manipulators
I-60
EN 61140 :2002/
IEC 61784-3 :2010
Version 3.9