Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 96

en-US
NOTICE
If a twin-head pump connection is established, entries on the graphic display of the pump
partner are not possible. This can be identified by a lock symbol on the "Main menu symbol".
Illustration of the pump symbols and meaning:
Display of
main pump
Case 1
Case 2
Case 3
Case 4
Case 5
Case 6
Active influences of the pump status on the display in the home screen for twin-head pumps
The active influences are listed from highest to lowest priority.
• The left symbol represents the pump being viewed.
• The right-hand symbol represents the partner pump.
Name
Main/standby operation:
Error on partner pump OFF
Main/standby operation:
Error at the partner pump
Main/standby operation: OFF
Main/standby operation:
This pump head is active
Main/standby operation:
Partner pump active
96
Display of
partner pump
Displayed
symbols
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Description
Main/standby operation: Only the main pump is
running.
Main/standby operation: Only the partner pump is
running.
Parallel operation: Only the main pump is running.
Parallel operation: Only the partner pump is run-
ning.
Parallel operation: The main pump and partner
pump are running.
Main/standby operation or parallel operation: No
pump running.
Description
Twin-head pump is set in main/standby opera-
tion.
This pump head is inactive due to:
• Control mode
• Error at the pump partner.
Twin-head pump is set in main/standby opera-
tion.
This pump head is active due to a fault at the
pump partner.
Twin-head pump is set in main/standby opera-
tion.
Both pumps are inactive in control mode.
Twin-head pump is set in main/standby opera-
tion.
This pump head is active in control mode.
Twin-head pump is set in main/standby opera-
tion.
The pump partner is active in control mode.