Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 126

en-US
you can switch Bluetooth on or off. When Bluetooth is switched on, the pump can connect to other
Bluetooth devices (e.g. Smartphone with Wilo-Assistant app and the Smart Connect function it has).
NOTICE
Bluetooth is switched on as a factory setting.
12.4 Key lock ON
The key lock function prevents accidental change of pump parameters by unauthorized persons.
Under "Settings"
1. "Device settings"
2. "Key lock On"
you can activate the key lock.
Simultaneous pressing (> 5 seconds) of back
NOTICE
You can also lock the keys using the digital inputs DI 1 and DI 2 (see section "Application and
function of the digital control inputs DI1 and DI2 [" 100]").
If the key lock was activated through digital inputs DI 1 or DI 2, the deactivation can be done
only through the digital inputs! A button combination is not possible!
The Home screen and warning as well as error messages are also displayed when the key lock is active so you
can monitor the pump status.
A lock symbol on the home screen indicates an activated key lock.
12.5 Device information
Under "Settings"
1. "Device settings"
2. "Device information"
you can read information about product names, the product and serial number as well as software and
hardware version.
12.6 Pump kick
In order to prevent blocking of the pump, a pump kick is set on the pump. After a set time interval, the pump
starts and switches off after a short time.
Prerequisite:
For the pump kick function, the power supply must not be interrupted.
126 Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
and context button deactivates the key lock.