Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 93

10.2 Settings menu
Settings
Set auto control
Setting assistant, setpoints, options
Manual operation
Manual override
Twin-head pump operation
Set twin-head pump
External interfaces
Analog, digital, SSM, SBM ...
Fig. 42: Menu Twin-head pump operation
In the "Twin-head pump operation" menu, a twin-head pump connection can be established or discon-
nected and the twin-head pump function can also be adjusted.
In the "Settings" menu
1. Select twin-head pump operation.
Menu "Twin-head pump function"
When a twin-head pump connection is established, the "Twin-head pump function" menu is used to switch
between
• Main/standby operation and
• Efficiency-optimised peak-load operation (parallel operation)
can be switched over.
NOTICE
When switching between main/standby operation and parallel operation, different parame-
ters of the pump are fundamentally changed. The pump is then started automatically.
Menu "Pump cycling interval"
If a twin-head pump connection is established, the time interval can be set in the "Pump cycling interval"
menu. Time interval: between 1 h and 36 h, factory setting: 24 h.
Menu "Connecting twin-head pump"
If twin-head pump connection is not yet established, in the "Settings" menu
1. "Twin-head pump operation"
2. "Connecting twin-head pump".
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
, select
Settings of
twin-head pump operation,
addressing of
twin-head pump partner,
mode etc.
, select
en-US
93