Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 146

en-US
Diagnostics help
Overview of hydraulic data
Overview of electrical data
Overview of analog input (AI1) Overview of settings
Overview of analog input (AI2) e.g. type of use of
SSM relay forced control
SBM relay forced control
Device information
Manufacturer contact
Table 49: Selection options – Diagnostics help
1)
For information about type of use, signal type and functions, see section "Application and function of the
analog inputs AI1 and AI2 [" 104]".
2)
See section "SSM/SBM relay forced control [" 100]".
146
Description
Overview of current hydraulic oper-
ating data.
Overview of current electrical oper-
ating data.
e.g. type of use of
temperature sensor,
signal type PT1000 for control mode
T-const.
temperature sensor,
signal type PT1000 for control mode
ΔT-const.
Forced control of the SSM relay
in order to check the relay and elec-
trical connection.
Forced control of the SBM relay,
in order to check the relay and elec-
trical connection.
Display of different device informa-
tion.
Display of contact data of the factory
customer service.
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Display
• Actual delivery head
• Actual volume flow
• Actual speed
• Actual fluid temperature
• Active restriction
Example: max. pump characteristic
curve
• Power supply
• Power consumption
• Consumed energy
• Active restriction
Example: max. pump characteristic
curve
• Operational hours
• Type of use
• Signal type
• Function
1)
• Type of use
• Signal type
• Function
1)
• Normal
• Forced active
• Forced inactive
2)
• Normal
• Forced active
• Forced inactive
2)
• Pump type
• Article number
• Serial number
• Software version
• Hardware version
• Contact data