Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 112

en-US
Signal type analog input (AI2)
For setpoint sensor
Fig. 51: Signal type
After selecting the signal type, it is defined how standard values are used:
Use standard values
Analog input (AI2)
Fig. 52: Use standard values
Defined standards for the transfer of the signal are used with "Use specifications". Finally the setting of the
analog input is ended as setpoint sensor.
OFF:
ON:
Min:
112
PT1000
0 – 10 V
2 – 10 V
0 – 20 mA
4 – 20 mA
Specifications
User-defined settings
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
set analog input to the
signal type 0...10 V
.
Set the signal/values
assignment.
1.0 V
2.0
3.0 V