System type
Fig. 29: Example – "Radiator" system type
Select the "Radiator" system type by turning the operating button and press to confirm.
Different control modes are available depending on the system type.
For the "Radiator" system type in the "Heating" application, the following control modes are available:
Control mode
‣ Differential pressure ∆p-v
‣ Dynamic Adapt plus
‣ Hall temperature T-const
Table 16: Selection of control mode for radiator system type in the heating application
Example: Control mode "Dynamic Adapt plus"
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Radiator
Underfloor heating
Ceiling heating
Air heater
Hydraulic shunt
Heat exchanger
Pump supplies
radiators.
Settings help
en-US
69