Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 76

en-US
Heating/cooling switchover
...►
Settings assistant
Current: Radiator – Differential pressure...
Heating/cooling switchover
Current: Heating
Setpoint delivery head (Δp-v)
Current: 6.5 m
Night setback
Detection: Switched off
Fig. 35: Heating/cooling switchover
Initially select "Heating" in the "Set control mode – Heating/cooling switchover" menu.
Then configure additional settings (e.g. setpoint specification, night setback, etc.) in the "Set control mode"
menu.
Heating/cooling switchover
Fig. 36: Heating/cooling switchover_Heating
The settings for cooling are made once the specifications for heating are completed. To do this, select "Cool-
ing" in the "Heating/cooling switchover" menu.
76
Set auto control
Heating
Cooling
Automatic
Binary input
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Setting the
automatic or
manual switchover
between heating and
cooling.
The pump manually
switches to heating
application.