Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 58

en-US
Settings
1.1
Set auto control
Setting assistant, setpoints, options
Manual operation
Manual override
Twin-head pump operation
Set twin-head pump
External interfaces
Analog, digital, SSM, SBM
Fig. 23: Main menu status display
There are three different classes of status displays:
1. Display process:
On-going processes have been highlighted in blue.
Processes mean pump operation may deviate from the adjusted control.
Example: Venting process.
2. Display warning:
Warning messages have been highlighted in yellow.
The pump functions are restricted if a warning has been output. (See section "Warning messages
[" 149]").
Example: Cable break detection on analog input.
3. Display error:
Error messages have been highlighted in red.
The pump stops operation if an error has occurred. (See section "Error messages [" 147]").
Example: Ambient temperature too high.
Example of a process display. Here: "Venting"
58 Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Overriding
control mode via
manual intervention.