Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 51

Home screen
1 1.1
3
Fig. 20: Home screen
Item Name
1 Main menu area
1.1 Status area:
error, warning, or
process information
display
2 Headline
3 Setpoint display panel
4 Setpoint editor
5 Active influences
6 Reset notification
7 Operating data and
measured value area
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Radiator - differential pressure Δp-v
Setpoint delivery head
1.0
6.1 m
Normal operation
Explanation
Selection of various main menus
Reference to ongoing process, a warning, or error message.
Blue: Process or communication status display (CIF module communi-
cation)
Yellow: Warning
Red: Error
Grey: No processes are running in the background; there are no warn-
ing or error messages.
Display of current application and control mode set.
Display of current setpoints.
Yellow frame: The setpoint editor is activated by pressing the operat-
ing button. This allows you to change values.
Display influences on the set control mode
e.g. active night setback, No-Flow Stop OFF (see table entitled "Active
influences"). Up to five active influences can be displayed.
If the setpoint editor is active, this displays the value set before the
value change.
The arrow shows that you can return to the previous value using the
back key.
Displays current operating data and measured values.
2
Duty point:
6.9
Δp-v
12.0
Q =
H =
Measured values:
T fluid =
P elec. =
W elec. =
Additional settings
4 5
en-US
6
7
10.3 m³/h
2.0 m
68.2 °C
160 W
42.0 kWh
8
51