Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 113

Max:
Table 46: Standard signal assignment
Select "User-defined setting" to configure additional settings:
Optional cable break detection is available for 0 ... 10 V and 0 ... 20 mA signal types only.
Optional cable break detection
Analog input (AI2)
Fig. 53: Optional cable break detection
Select "Switched off" to switch off cable break detection.
Select "Switched on" to activate cable break detection only within an adjustable limit value.
Optional cable break detection
Analog input (AI2)
Limit value
Fig. 54: Cable break limit value
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Switched off
Switched on
Switched off
Switched on
10.0 V
Signal strength below
the set limit value
is interpreted as
a cable break.
Signal strength below
the set limit value
is interpreted as
a cable break.
en-US
113