Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 57

Select type of use
Analog input (AI2)
Fig. 22: Settings dialog
NOTICE
Press the operating button without selecting another parameter or adjusting another value
to confirm the setting.
Press the Back button
The menu changes to the previous setting or previous menu.
NOTICE
Pressing the context button
settings.
Status area and status displays
The status area is located on the left side above the main menu area
table).
If a status is active, it is possible to display and select status menu items in the main menu.
Turn the operating button to the status area to show the active status.
If an active process (e.g. venting process) is quit or discarded, the status display is hidden again.
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Not configured
Setpoint sensor
Differential pressure sensor
Temperature sensor
External sensor
to discard the current adjustment and retain the previous setting.
will display additional context-related options for further
Set analog input
as setpoint controller,
e.g. for delivery head
1.1
. (See also "Home screen" figure and
en-US
57