Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 105

...External interfaces
Function control input (DI1)
Current: Not used
Function control input (DI2)
Current: Not used
Function analog input (AI1)
Not configured, 0 – 10 V
Function analog input (AI2)
Not configured, 0 – 10 V
Fig. 44: Function analog input
After selecting one of the options "Analog input (AI1) function" or "Analog input (AI2) function", select the
following query or setting:
Setting
Overview of the analog input
Set analog input.
Table 41: Analog input AI1 or AI2 setting
Information about the current settings can be retrieved in "Overview of the analog input".
The type of use, signal type, and signal/values assignment are defined in "Set analog input".
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Control input AI1 or AI2 function
Overview of settings of this analog input, for example:
• Type of use: Temperature sensor
• Signal type: PT1000
Adjustment of type of use, signal type, and corresponding sig-
nal/value assignment
Set the used signal type
and the associated
parameters for the
analog input
.
en-US
105