Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 8

en-US
• CAUTION!
Non-compliance can cause property damage or even irreparable
damage.
• NOTICE!
Useful information on handling the product
Symbols
The following symbols are used in these instructions:
General warning symbol
Danger of electrical voltage
Warning of hot surfaces
Warning of magnetic fields
Notes
Identifying Cross References
The name of the section or table is in inverted commas [" "]. The page
number follows in square brackets [ ].
2.2 Personnel qualifications
Personnel must:
• Be informed of the locally applicable accident prevention regula-
tions.
• Have read and understood the installation and operating instruc-
tions.
The personnel must have the following qualifications:
• Electrical work: A qualified electrician must carry out the electrical
work.
• Installation/dismantling work: Specialist personnel must be trained
to handle the necessary tools and required fixing materials.
8 Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10