Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 53

Symbol Information
Override OFF
Context menu
pump ON/OFF
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Meaning
Pump continues to run in the configured control mode without additional
influences.
Override OFF active.
Pump is switched off with maximum priority. The pump is stationary.
Indication of activating override source:
1. If not otherwise indicated: Override caused by request from HMI or
CIF module
2. DI1/DI2: Override caused by request via binary input.
MAX override active.
Pump running at maximum output.
Indication of activating override source:
1. If not otherwise indicated: Override caused by request from HMI or
CIF module
2. DI1/DI2: Override caused by request via binary input.
MIN override active.
Pump running at minimum output.
Indication of activating override source:
1. If not otherwise indicated: Override caused by request from HMI or
CIF module
2. DI1/DI2: Override caused by request via binary input.
MANUAL override active.
Pump running in control mode defined for MANUAL with a setpoint ad-
justed for MANUAL.
Indication of activating override source:
1. If not otherwise indicated: Override caused by request from HMI or
CIF module
2. DI1/DI2: Override caused by request via binary input.
3. BA error: If monitored telegrams as part of building automation bus
communication are not received, the mode returns to MANUAL.
Automatic detection of disinfection active.
Disinfection detected. The pump supports disinfection at maximum out-
put.
Detecting night setback switched on. Night setback of the heat generator
detected. Pump running with adapted, reduced output.
Detecting night setback switched on. Pump running in daytime operation
in the adjusted control mode.
Pump switched on in the menu using "Pump ON/OFF".
Override possible with:
• MANUAL override
• MIN override
• MAX override
en-US
53