Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 111

Select type of use
Analog input (AI2)
Fig. 50: Settings dialog
Select "Setpoint sensor" as setpoint source.
NOTICE
If another usage type has been set to "Not configured" in the "Select type of use" menu,
check whether the analog input is already used for another type of use.
If necessary, select a different source.
Select the "Signal type" after selecting the type of use:
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Not configured
Setpoint sensor
Differential pressure sensor
Temperature sensor
External sensor
Set analog input
as setpoint controller,
e.g. for delivery head
en-US
111