Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 55

menu is now displayed. Press the operating button to change the focus to the corresponding sub-menu.
If the operating focus is on "Home screen" and you press the operating button, the setpoint editor is acti-
vated (yellow frame). You can adjust the setpoint value.
Press and hold the Back button
as a result of previous operational steps.
Sub-menu
Each sub-menu is made up of a list of sub-menu items.
Each sub-menu item consists of a title and an information bar.
The title lists an additional sub-menu or a downstream settings dialog.
The information bar shows descriptive information about the available sub-menu or the downstream set-
tings dialog. The information bar of a settings dialog shows the adjusted value (e.g. a setpoint). With this dis-
play, you can check settings without having to open the settings dialog.
"Settings" sub-menu
Different settings can be changed in the "Settings" menu
Turn the operating button to the "Gear wheel" icon
Press the operating button to change the focus to the "Settings" sub-menu.
Turn the operating button to the left or right to select a sub-menu item. The selected sub-menu item has
been highlighted in green.
Press the operating button to confirm your selection. The selected sub-menu or downstream settings dialog
appears.
Settings
Set auto control
Setting assistant, setpoints, options
Manual operation
Manual override
Twin-head pump operation
Set twin-head pump
External interfaces
Analog, digital, SSM, SBM
Fig. 21: Settings menu
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
for more than one second if the operating focus is not on the main menu
to select the "Settings" menu.
1
.
Overriding
control mode via
manual intervention.
2
en-US
3
55