Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 9

• Operation must be carried out by personnel who have been trained
in how the full system operates.
• Maintenance work: The technician must be familiar with the use of
operating fluids and their disposal.
Definition "Qualified Electrician"
A qualified electrician is someone with suitable technical training,
knowledge and experience who can identify and avoid the dangers
associated with electricity.
The operator must confirm and ensure the field of authority, the
competence, and the monitoring of the personnel. If the personnel do
not possess the necessary knowledge, they must be trained and in-
structed. If required, this can be carried out by the product manufac-
turer at the operator's request.
2.3 Electrical work
• Have electrical work carried out by a qualified electrician.
• When connecting to the local power supply system, comply with
the nationally applicable guidelines, standards, and regulations as
well as specifications issued by the local energy supply companies.
• Before commencing work, disconnect the product from the power
supply and safeguard it from being switched on again.
• Give personnel training on how to establish the electrical connec-
tion and the methods for switching off the product.
• Observe the technical information in these installation and operat-
ing instructions as well as on the rating plate.
• Ground the product.
• Comply with the manufacturer's specifications when connecting
the product to electrical switching systems.
• Have a defective connection cable replaced immediately by a quali-
fied electrician.
• Never remove operating elements.
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
en-US
9