Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 59

Pump venting is running
Remaining time:
Fig. 24: Status display venting
The "Venting" icon has been selected in the main menu. The venting process is active and information about
venting is displayed.
Further status displays can be displayed, if they are available, by turning the operating button to the corre-
sponding symbol.
Symbol
Table 15: Potential data displayed in the status area
Additional settings can be made in the context menu. For this purpose, press the Context button
Press the Back button
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Meaning
Error message
Pump stopped!
Warning message
Pump operation restricted!
Active venting
Venting in progress. Subsequently returns to normal operation.
Communication status – a CIF module has been installed and is active.
Pump in control mode, monitoring and control by building automation available.
Software update started – transfer and verification
Pump continues to run in control mode until the update bundle has been fully
transferred and verified.
to return to the main menu.
Pump venting
takes a few minutes.
The pump can continue
to be set up
during this process.
The hydraulic system
must be vented
at a suitable point.
Cancel
pump venting
en-US
.
59