Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 108

en-US
...►
Settings assistant
Current: Radiator – Differential pressure ...
Setpoint delivery head (Δp-v)
Current: 6.0 m
Night setback
Detection: Switched off
No-Flow Stop
Current: Switched off
Fig. 46: Setpoint editor
2. Select setpoint and confirm by pressing the operating button.
3. Press context button
Selection of possible setpoint sources:
Setpoint source
Fig. 47: Setpoint source
108
Set auto control
and select "Setpoint of external source".
Internal setpoint
Analog input 1
Analog input 2
CIF module
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Setting the
setpoint of the
delivery head H for the
control mode Δp-v
Setpoint comes from
analog input (AI2)