Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 72

en-US
For example: Input of the setpoint for differential pressure control, activation/deactivation of night setback,
No-Flow Stop function or input emergency operation speed.
Heating & cooling application
The "Heating & cooling" application combines both the applications. The pump is set separately for both ap-
plications and can switch between both applications.
In the "Settings" menu
1. "Set control mode"
2. "Setting assistant"
3. "Heating & cooling" in sequence.
Application
Fig. 33: "Heating & cooling" application selection
Select the control mode for the "Heating" application first.
System types for heating application
‣ Radiator
‣ Underfloor heating
‣ Ceiling heating
‣ Fan heater
72
, select
Heating
Cooling
Heating & cooling
Drinking water
Basic control modes
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
The pump is used
alternately
for both
heating and
cooling. The
control mode can be set
separately for
the two
applications.
Control mode
Differential pressure Δp-v
Dynamic Adapt plus
Hall temperature T-const.
Differential pressure Δp-c
Dynamic Adapt plus
Hall temperature T-const.
Differential pressure Δp-v
Dynamic Adapt plus
Hall temperature T-const.
Settings help