Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 137

Help
Help system
Help pages of the pump
Service address
Advanced help with Service
Fig. 71: Service address
"Help"
1. "Service address".
The contact data is dependent on the country setting in "Country, language, units" menu. Only local ad-
dresses are mentioned for each country.
15 Maintenance
15.1 Decommissioning
The pump must be shut down before carrying out maintenance, repair, or dismantling work.
DANGER
Electric shock!
There is danger of death from electric shock when working on electrical devices.
• Work on electrical components may only be carried out by qualified electricians!
• Switch off the voltage on all-poles of the pump and secure against unauthorized restart!
• Always deactivate the power supply from the pump and if necessary SSM and SBM!
• Due to the presence of dangerous contact voltage, work on the module must not be started until 5 min-
utes have elapsed!
• Check whether all connections (even potential-free contacts) are voltage-free!
• The pump may still be live even in voltage-free state. The rotor induces a contact voltage, which is also
present at the motor contacts. Close the existing shut-off valves in front of and behind the pump!
• Do not operate the pump if the electronic module/Wilo-Connector is damaged!
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Display of the
contact address where
you can reach
your country's Service.
en-US
137