Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 49

Item Name
3.3 Blue LED indicator
3.4 Operating button
3.5 Back key
3.6 Context key
5.1 LED display
5.2 LED display operating
button
Table 11: Description of operating elements
8.5 Operating the pump
Pump settings
Carry out settings by turning and pressing the operating button. Turn the operating button to the left or
right to browse the menus or configure settings. A green focus indicates navigation in the menu. A yellow
focus indicates a configuration of settings.
• Green focus: Navigation in menu.
• Yellow focus: Change settings.
• Turn : Selection menus and set parameters.
• Push : Activation of menus or confirming settings.
Press the Back button
cus back to the previous focus. Consequently, the focus moves one level further up in the structure or to a
previous setting.
Pressing the Back button
value returns the focus to the previous focus. The adjusted value will be discarded. The previous value re-
mains unchanged.
If the Back button
erated from the main menu.
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Explanation
LED lights up: Pump is being affected externally via an interface, for
example by:
• Bluetooth remote control
• Setpoint specification via analog input AI1 or AI2
• Intervention of building automation via digital input DI1, DI2 or bus
communication
Flashes with active twin-head pump connection.
Navigate menus and edit content by turning and pressing.
Navigates in menu:
• To go back to the previous menu level (briefly press once)
• To go back to the previous settings (briefly press once)
• Return to the main menu (press and hold 1 x, > 2 seconds)
Turns key lock on or off in combination with the Context button.
> 5 seconds.
Opens context menu with additional options and functions.
Turns key lock on or off in combination with the back button. > 5 sec-
onds.
Indicates error code and Bluetooth PIN.
Initiates venting function when pressed. Turning is not possible.
(pos. 3.5 in section "Description of operating elements [" 48]") to change the fo-
after having changed a setting (yellow focus) without confirming the changed
is pressed for more than 2 seconds, the Home screen opens and the pump can be op-
en-US
49