Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 138

en-US
• In case of impermissible removal of operating and settings elements on the electronic module, there is a
risk of electric shock if inner electrical components are touched!
WARNING
Risk of burns!
Depending on the operating status of the pump and the system (fluid temperature), the en-
tire pump can get hot.
• Risk of burns when touching the pump!
• Allow the system and pump to cool to room temperature!
Follow all safety instructions described in sections "Safety [" 6]" to "Electrical connection [" 29]"!
Install and connect the pump as described in section "Installation [" 21]" and "Electrical connection [" 29]"
after having completed maintenance and repairs. The pumps are activated in accordance with the "Commis-
sioning [" 46]" section.
15.2 Dismantling/installation
Before any dismantling/installation operation, make sure that the section "Shutdown" has been taken
into consideration!
WARNING
Risk of burns!
Incorrect dismantling/installation can result in personal injury and property damage.
Depending on the operating status of the pump and the system (fluid temperature), the en-
tire pump can get very hot.
There is a severe risk of burns from simply touching the pump!
• Allow the system and pump to cool to room temperature!
WARNING
Risk of scalding!
The fluid is under high pressure and can be very hot.
There is a risk of scalding due to escaping hot fluid!
• Close shut-off devices on both sides of the pump!
• Allow the system and pump to cool to room temperature!
• Drain the shut-off branch of the system!
• If no shut-off valves are fitted, drain the system!
• Follow the manufacturer's instructions and safety data sheets for possible additives in the system!
138 Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10