Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 70

en-US
Control mode
Fig. 30: Example – "Dynamic Adapt plus" control mode
Turn the operating button to select "Dynamic Adapt plus" control mode. Press the operating button to con-
firm.
No other settings are required in Dynamic Adapt plus.
Once you have confirmed the selection, it is displayed in the "Settings assistant" menu.
Settings assistant
Current: Radiator – Dynamic Adapt plus
Night setback
Detection: Switched off
Emergency operation speed
Constant speed: 2000 rpm
Pump ON/OFF
The pump is: Motor off
Fig. 31: Settings assistant
Direct selection of a basic control mode
In the "Settings" menu
70
Differential pressure Δp-v
Dynamic Adapt plus
Hall temperature T-const.
Set auto control
, select
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Pump adjusts its
performance automatically to
the
variable
demand of the
radiators
without the input of a setpoint.
Settings help
Select a control mode via the
application and
system type.
All control modes
are also available to be selected
directly.