Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 34

en-US
Fig. 11: Connection options
The pump can be connected to power supplies with the following voltage ratings:
• 1~ 208 V ... 240 V
• 1~ 115 V
All communication interfaces in the terminal room (analog inputs, digital inputs, Wilo Net, SSM (FAULT) and
SBM (RUN)) comply with the SELV standard.
7.4 Connecting and dismantling the Wilo-Connector
WARNING
Risk of fatal injury from electric shock!
• Never connect or disconnect the Wilo-Connector while power is on!
CAUTION
Property damage due to improper fixation of the Wilo-Connector!
Improper fixation of the Wilo-Connector may cause contact problems and electrical damage!
• Exclusively operate the pump when the metal clamp of the Wilo-Connector is locked!
• Disconnection of the Wilo-Connector under voltage is not permitted!
34 Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10