Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 118

en-US
2. "Function analog input AI1" or "Function analog input AI2"
3. "Set analog input".
First select type of use:
Select type of use
Analog input (AI2)
Fig. 60: Settings dialogue actual value sensor
Select one of the types of use "Differential pressure sensor", "Temperature sensor" or "External sensor" as
one of the usage types.
NOTICE
If another usage type has been set to "Not configured" in the "Select type of use" menu,
check whether the analog input is already used for another type of use.
If necessary, select a different source.
Select the "Signal type" after selecting the actual value sensor:
118
Not configured
Setpoint sensor
Differential pressure sensor
Temperature sensor
External sensor
Installation and operating instructions • Wilo-Stratos MAXO/-D/-Z • Ed.02/2023-10
Use analog input as
actual value input for
temperature sensor, e.g. for
control mode T-c.