Device Linking - Boston Scientific Precision SC-1110 Mode D'emploi

Precision™ Spinal Cord Stimulator System Clinician Manual
To Access the Pulse Width and Rate Options (if enabled through Bionic Navigator):
1. Press and hold the
"
screen appears. This is indicated by "Width" in the bottom left corner of the screen.
2. Area 1 will initially be highlighted. Press the
3. When the desired Area is highlighted, press p or q to increase or decrease the Pulse
Width.
4. To continue to Rate adjustment, press and hold the
Pulse Width Area screen. The Rate screen is indicated by "Rate" in the bottom left corner of
the screen.
5. Area 1 will initially be highlighted. Press the
6. When the desired area screen is highlighted, press p or q to increase or decrease the
Rate.
7. To return to the main Level screen, press and hold the
Level screen appears.

Device Linking

A Remote Control can communicate with only one Stimulator at a time. This prevents the
Remote Control from accidentally controlling an unintended device. In the linking process, the
Remote Control will identify, by telemetry, the intended Stimulator for communication.
P
1. Press and hold the
between the Remote Control and the Stimulator.
Clinician Manual
91173656-02 60 of 385
button on the Remote Control for three seconds until the Pulse Width
"
"
button to unlock the Remote Control and initiate communication
button to cycle to the Area you wish to adjust.
button for three seconds from any
"
button to cycle to the Area you wish to adjust.
button for three seconds until the
"