Lead Extension; Lead Splitter - Boston Scientific Precision SC-1110 Mode D'emploi

Système de stimulation médullaire
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Device and Product Description
Percutaneous Leads
The eight-contact percutaneous leads are available in lengths of 30 cm, 50 cm, and 70 cm.
Each lead has eight electrode contacts located near the distal end. Each contact is 3 mm in
length and is spaced 1, 4, or 6 mm from the adjacent contact. The 16 contact percutaneous
lead (Infinion™ 16 Lead and Infinion CX Lead) is available in lengths of 50 cm and 70 cm. Each
lead has 16 contacts located near the distal end. Each contact is 3 mm in length and is spaced
1 mm from the adjacent contact. The Infinion 16 lead must be inserted into a Splitter 2x8 which
then connects to a Precision IPG's 8 contact ports or 8 contact OR Cables.
Percutaneous Trial Leads
Trial Lead Kit, containing the Linear™ Lead and the associated components, is intended to be
used for the temporary trial phase.

Lead Extension

Lead Extensions are designed to connect the percutaneous and paddle leads to the Precision
IPG for spinal cord stimulation. The extension may be added to a lead to externalize the lead
for a trial procedure or to extend the lead when a permanent IPG is implanted.
Lead extensions are available in lengths of 25 cm, 35 cm, and 55 cm. Each extension has eight
electrode contacts located near the distal end. Each contact is 3 mm in length and is spaced
1 mm from the adjacent contact. The extension can be connected to either the Trial Stimulator
(via an OR Cable Assembly included in the Leads Kit) or directly to the Precision IPG.

Lead Splitter

The 2x4 Splitters are designed to connect multiple percutaneous leads to the Precision IPG.
The Linear leads may be inserted into a splitter for a maximum of four Linear leads per IPG.
Four of the eight contacts of each Linear lead will be activated. Two configurations of 2x4
splitters are available: Distal 4 (D4) and Wide 4 (W4). The two versions offer different contact
configurations. The Lead Splitter 2x8 is required to connect the Infinion™ 16 contact lead to the
IPG. Only one Infinion™ 16 lead through one Splitter 2x8 can be connected to a Precision IPG.
Clinician Manual
91173656-02
3 of 385

Publicité

Table des Matières
loading

Table des Matières